A U-100 insulin syringe is marked for 100 units in 1 mL; a U-40 syringe is marked for 40 units in 1 mL. U-100 syringes come in 0.3 mL, 0.5 mL and 1 mL barrels, which hold 30, 50 and 100 units.[3][4][5]

The same volume reads as a different number on each scale, so a units number only means something next to the scale it was worked out for. The rest of this page is the arithmetic and how to read the barrel.

What U-100 and U-40 mean

The “U” number is the units of insulin in 1 mL of the insulin the syringe is made for, and the syringe is marked to match. An FDA-approved U-100 human insulin is labelled “100 units/mL (U-100)”, and its carton says “Use only with a U-100 syringe”.[1] An FDA-approved U-40 veterinary insulin says “U-40 insulin contains 40 units/mL”, and its label warns: “USE OF A SYRINGE OTHER THAN A U-40 SYRINGE WILL RESULT IN INCORRECT DOSING.”[2]

When a syringe is used to measure something other than insulin, such as a mixed peptide vial, the units marks are simply a volume scale:

ScaleUnits in 1 mLOne unit is
U-1001000.01 mL
U-40400.025 mL

What one unit holds depends on what is in the vial, not on the syringe. See why the same dose is a different number of units.

Barrel sizes

The FDA’s device database (AccessGUDID) lists U-100 insulin syringes from the same maker in three barrel volumes: 0.3 mL, 0.5 mL and 1 mL.[3][4][5] All three are U-100, so all three use 100 units per mL. Only the capacity differs:

BarrelCapacity on a U-100 scaleArithmetic
0.3 mL30 units0.3 × 100
0.5 mL50 units0.5 × 100
1 mL100 units1 × 100

A draw larger than the barrel does not fit in one go. 0.6 mL is 60 units, more than a 0.5 mL barrel holds; it needs the 1 mL size. The dose volume calculator warns when a result is more than the syringe you picked can hold.

The database also lists a “3/10mL Half Unit Insulin Syringe”, a 0.3 mL syringe sold for half-unit measuring.[6] Whether yours is marked in half units is on the box, and you can check it on the barrel as described below.

Reading the barrel

Do not assume what a small line is worth; work it out from your own syringe. Pick two numbers printed on the barrel, subtract the smaller from the larger, and divide by the number of spaces between them.

  • Numbers 0 and 10 with ten spaces between them: each line is 1 unit.
  • Numbers 0 and 10 with five spaces between them: each line is 2 units, so odd numbers fall between lines.
  • Numbers 0 and 5 with ten spaces between them: each line is half a unit.

A result such as 7.5 units sits on a line on a half-unit syringe, halfway between lines on a 1-unit syringe, and between the 6 and 8 lines on a 2-unit syringe. The syringe guide covers where to read the measurement on the plunger.

U-100 vs U-40: the arithmetic

Convert through mL. Units ÷ scale = mL, then mL × the other scale = units.

VolumeU-100 unitsU-40 units
0.1 mL104
0.25 mL2510
0.3 mL3012
0.5 mL5020
1 mL10040

So U-40 units × 2.5 = U-100 units, and U-100 units × 0.4 = U-40 units. Ten units on a U-40 syringe is the same volume as 25 units on a U-100 syringe. Reading one scale as if it were the other gives the wrong volume by a factor of 2.5, which is the mistake the U-40 label warns about.[2]

The converter below does the sum in either direction, for U-100, U-50 and U-40:

Convert from
Syringe scale

Converted

Example numbers

10 units is 0.1 mL on U-100.

Enter a number and press Calculate.

 

Millilitres0.1 mL10 units on U-100
0.1 mL on each syringe scale
U-10010 units
U-505 units
U-404 units

Nothing you type is stored or sent anywhere. The arithmetic runs in your browser.

The working, with your numbers

Each step, so you can check it by hand
  1. Units to mL10 units ÷ 100 units per mL = 0.1 mL

“≈” marks a value rounded for display. Working each line by hand from the numbers shown gives the same result.

What to check

  • The scale printed on the syringe or its box (U-100 or U-40) matches the one your instructions and any calculator assume.
  • The barrel holds the whole volume.
  • What each small line is worth, worked out from the printed numbers.
  • The dose and the syringe come from your prescriber’s or pharmacy’s instructions; this page only does the arithmetic.

Where Kept fits

Getting the units right is a one-time job per vial. Kept, a paid iPhone app, handles the part that repeats: a reminder when each dose is due, a one-tap log, and a supply count with a low-supply alert. Kept has no calculator, so use the units to mL converter for the arithmetic.