There is no single right amount of water. The water only sets the concentration: the amount in the vial stays the same, so more water means each unit on the syringe holds less, and less water means each unit holds more.

If your pharmacy or prescriber has told you how much to add, use that number. The rest of this page shows the arithmetic behind it, so you can check what a given volume does to the units you draw. The numbers below are arithmetic examples, not suggested doses or volumes.

Water changes the concentration, not the amount

Two divisions cover everything:

  • Concentration = amount in the vial ÷ water added. A 10 mg vial with 2 mL is 10 ÷ 2 = 5 mg per mL.
  • Volume for a dose = dose ÷ concentration, in the same unit of weight. At 5 mg per mL, 1 mg is 1 ÷ 5 = 0.2 mL, which is 20 units on a U-100 syringe (100 units fill 1 mL).

Add 3 mL to the same vial instead and the concentration drops to 3.33 mg per mL. The vial still holds 10 mg, the dose is still the dose, but it now takes 30 units instead of 20. Nothing about the amount has changed; only the volume it is spread through.

The reconstitution math guide walks through the same steps from a vial label.

What the bacteriostatic water label says

The label for Hospira’s Bacteriostatic Water for Injection, USP describes it as sterile water for injection with 0.9% or 1.1% benzyl alcohol “added as a bacteriostatic preservative”, supplied in a multiple-dose container.[1] It says the product is “indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.”[1]

On volume, the label does not give a number. It says: “The volume of the preparation to be used for diluting or dissolving any drug for injection is dependent on the vehicle concentration, dose and route of administration as recommended by the manufacturer.”[1] In other words, the drug’s instructions set the volume, not the water.

The same label carries the warning “NOT FOR USE IN NEONATES”, and under Drug Interactions it says: “Do not store reconstituted solutions of drugs for injection unless otherwise directed by the manufacturer of the solute.”[1] For anything about storing a mixed vial, follow the product label or your pharmacy’s instructions. The bacteriostatic water guide has more on what it is.

Worked tables: 10, 30 and 60 mg vials

Each row shows what a given volume of water does. “Units per 1 mg” is a rate, not a dose: multiply it by the amount written in your instructions to get the units for that amount. Units are on a U-100 syringe and rounded to 0.1 unit.

10 mg vial: water addedConcentrationOne U-100 unit holdsUnits per 1 mg
1 mL10 mg/mL0.1 mg10 units
2 mL5 mg/mL0.05 mg20 units
3 mL3.33 mg/mL0.0333 mg30 units
30 mg vial: water addedConcentrationOne U-100 unit holdsUnits per 1 mg
1 mL30 mg/mL0.3 mg3.3 units
2 mL15 mg/mL0.15 mg6.7 units
3 mL10 mg/mL0.1 mg10 units
60 mg vial: water addedConcentrationOne U-100 unit holdsUnits per 1 mg
1 mL60 mg/mL0.6 mg1.7 units
2 mL30 mg/mL0.3 mg3.3 units
3 mL20 mg/mL0.2 mg5 units

The figures were produced with the same code that runs the calculators on this site. Two patterns stand out. Doubling the water halves the concentration and doubles the units for the same amount. And the same water in a bigger vial makes a much stronger mix: 1 mL in a 60 mg vial gives 60 mg per mL, where each unit holds six times what it holds in a 10 mg vial with 1 mL.

What more or less water changes

  • Units per dose. More water, more units for the same amount. Fewer units mean a smaller, harder-to-read draw.
  • Readability. One unit on a U-100 syringe is 0.01 mL. A draw of a unit or two is a very small volume and hard to read. The insulin syringe sizes article explains the barrels and how to work out what each line is worth.
  • Rounding. Some volumes give awkward numbers (3 mL in a 10 mg vial gives 3.33 mg per mL). The calculators show the exact working and say when a result has been rounded.
  • What the vial holds. The water has to fit in the vial with room to spare. Check the vial before choosing a large volume.
  • How many doses. Not at all. The number of doses in a vial is the vial amount divided by the dose; the water does not enter into it. See how many doses are in a vial.

Try it with your own numbers

Work backwards from a concentration: type the amount in your vial and the concentration you want, and the calculator shows the water to add, rounded to 0.01 mL.

Concentration unit

Water to add

Example numbers

Add 2 mL.

Enter the vial amount and the concentration you want, then press Calculate.

 

Water to add2 mLrounded to 0.01 mL
Concentration you get5 mg/mL5,000 mcg/mL

Nothing you type is stored or sent anywhere. The arithmetic runs in your browser.

The working, with your numbers

Each step, so you can check it by hand
  1. Water10 mg ÷ 5 mg/mL = 2 mL

“≈” marks a value rounded for display. Working each line by hand from the numbers shown gives the same result.

Or work forwards from the water you added. This is the tirzepatide calculator, preset with a 10 mg vial and 2 mL; type the dose from your instructions to see the units:

Vial sizes
As printed on the vial label.
Water volumes
Bacteriostatic water, in millilitres.
As written in your instructions.
Dose unit
Syringe (U-100)

Result

Calculated

Enter your dose and press Calculate.

Concentration: 5 mg/mL

The drawing is an illustration of the arithmetic. Always read the printed scale on your own syringe.

Show the working

The working appears here after you press Calculate.

“≈” marks a value rounded for display. Working each line by hand from the numbers shown gives the same result.

Nothing you type is stored or sent anywhere. The arithmetic runs in your browser.

Next step

Now make sure you take it.

Kept reminds you when each dose is due and logs it in one tap.

Set my reminder in Kept
Illustration, not a screenshot.

Arithmetic only. This is educational arithmetic, not medical advice. Check every number against your vial label and your clinician's or pharmacy's instructions.

Kept

Scan to get Kept

Point your iPhone camera at the code.

Open the App Store

Full page: Tirzepatide calculator, with units charts and worked examples.

The full peptide reconstitution calculator also works out the water for a set number of units per dose. For large vials, see the NAD+ vial arithmetic, and the retatrutide and tirzepatide calculators have units charts for each vial size.

Follow the instruction you were given

When a pharmacy label or a prescriber names a volume, use it, even if a different volume would give rounder numbers. Units drawn only match the dose when the water in the vial is the water the calculation assumed. If you are not sure what was added to a vial, do not guess; ask the pharmacy.

Where Kept fits

The calculator gives you the number once. Kept, a paid iPhone app, is for the weeks after: a reminder when each dose is due, a one-tap log from the notification, and a supply count that warns you before the vial runs low. Kept has no calculator, so keep using this page for the arithmetic.